Adding more simplicity :-)

We have been busy with the rest of life this month (September is always a very busy time at work for us both).

However, our thinking has been progressing and we have been finding lots of inspiration from very small boats and from other people’s projects. So for example this video from Sailing Magic Carpet

It ties in with our Foredeck and Forecabin plans update or at least it confirms that we are making some different choices.

Our chain lockers were quite similar. We totally agree on the need for more space for chain and for the weight to be further aft. Initially our plans were quite similar (see Plans for anchoring). However, this is where we have been able to simplify things a lot.

A combination of things have meant that we are completely changing our forecabin, it will be a lot simpler in many ways. We started that thinking in Foredeck and Forecabin plans update but we can now go further.

The two key things that have led us to a simpler solution are Water and Beds.

Water

When we decided to remove the stainless steel water tank and use some of the space for our batteries we have been through a number of ideas for water tanks. Now we have realised we can build them into the hull and this gives us huge advantages:

  • far greater capacity as no wasted space
  • much safer. They strengthen the hull and create extra crash boxes

We also realise that we can use the same technique for the batteries (rather than a drop in box build it into the bull), for the chain locker and for storage/crash boxes.

Beds.

Already we have reduced the number of beds by removing the fold out pilot berth above the starboard settee (it has saved weight and created a much more usable space). We have also replaced the “V” berth in the aft cabin that worked best as a 2 singles with one double Pullman style berth.

When we realised that the “V” berth in the forecabin wasn’t actually long enough for an adult, let alone 2 it simplified things a lot. It also means that we have a chance to create a much better chain locker than Magic Carpet 2.

So.

The key limit on the “V” berth length was avoiding having the chain pipe come down through the middle of the bunk. By moving to one single bunk we can move the chainpipe slightly to starboard so that there is plenty of space for the single bunk to extend past the chainpipe on the port side. Not only does this make the bunk full length and a good width it also means that we can use the chainpipe to drop the chain vertically into the chain locker despite moving it aft. That is a huge advantage over our original plans and what Aladino can do on Magic Carper 2 where the chain slides into the chain locker almost at the bottom – the chain can stack better, be further aft and have a deep crash box forward of it.

I’m now planning 4 watertight areas under the original”V” berth height. Each of them will be considerably higher than the waterline and all of them will be able to have a removable, watertight lid.

At the very forward end there will be a proper crashbox that we will probably fill with foam (there will be another forward of this beyond the foot of the bed that will also be filled with foam). These crashboxes will mean the whole bow from below the waterline to the bow roller will not be able to flood the boat if damaged.

Aft of the crashbox will be the chain locker. When at sea we will disconnect the chain from the anchor and attach a line between a deck bung for the chainpipe and the chain which will drop down to the locker. That will allow a watertight lid to be fitted over the chain locker. The bottom of the anchor locker will drain into a much smaller locker aft of it. This will have a pump to remove any water that comes in to the chain locker with the chain. This small locker will also have a watertight lid so that the two act as another crashbox.

Aft of this will be a full width built in water tank. The top of this will be the “footwell” when sitting on the bunk. It too will act as a crash box so a hole in the hull here will contaminate this water but not flood the boat.

The doorway into the forecabin will no longer be full height. The bottom will be level with the top of the water tank with a step in the heads compartment so that you can get up and into the cabin (no standing headroom but full sitting headroom on the bunk). The heads compartment will be your dressing area. There will be a door for this cabin, separating it from the heads.

Additionally, I want to learn something from the older Amels (like Delos). So we will carry a sheet of wood that can be bolted over the doorway on the forward side of the bulkhead. It will have a rubber seal so that the whole forecabin can be turned into a watertight crashbox. I can imagine that when sailing with only the two of us we might put that in place quite often when at sea (and just use the forehatch for access to the forecabin as a storage area.

Simpler

By embracing the limits on the size of the forecabin which mean a V berth for two adults isn’t practical we end up with a much simpler, stronger and safer boat that will suit our needs much better. We don’t need to be able to sleep 3 couples and 2 singles on board, but we do need to carry enough water and would like extra protection from potential damage caused by debris floating around our oceans.

Thinking about this has also helped us think about simpler supports for the Bow Roller, Anchor Windlass and Inner forestay. So we can hopefully progress them soon.

Once I can get the companionway steps removed, this approach of watertight compartments built into the hull is going to make the battery boxes much simpler and more compact. I think the outcome will be larger water tanks and being able to move the Inverter and Mains Galvanic Isolator into the motor room so that we can keep the wet locker behind the steps.

It takes a long time to simplify things, but the results are well worth it.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.